• December 22, 2020

• December 22, 2020

• November 25, 2020

• November 25, 2020

• October 19, 2020

• October 14, 2020

• October 14, 2020

1. Replace A4988 Driver to TMC2208 on motherboard 2. Download IDEX Firmware from our Download Center 3. Burn the TMC2208 Firmware

• July 09, 2020

We use TL-D3 Pro for demonstration. Just need to change building volume to other model, such as Hands 2 (220mm*220mm*250mm), TL-D5(500mm*500mm*500mm), TL-D6(600mm*600mm*600mm) 1. The most important thing is to set the Start and End G-code for the Tenlog DMP printer. So we first show the G-code settings in the machine settings. You can download all the pictures and G-code from our Download Center S...

• April 21, 2020

• April 03, 2020

1. Although we set the nozzle offset before leaving the factory, the machine structure may change during transportation, so after receiving the tenlog DMP 3D Printer, you should make an offset adjustment. This allows the Independent Dual Extruder 3D Printer to print a perfect Dual-Material object. 2. When you reset the tenlog DMP 3D Printer to factory settings, or any other time you find that ther...