Blog

Home Blog

Blog

  • New UI and Firmware Support Print from Any Height
    • January 06, 2020

    For the newest Firmware and UI, we push a new functions for our Tenlog IDEX 3D Printer, Print from Any Height! Download here, https://www.tenlog3d.com/download_d5 How to use? If any problem happen during printing, For example, a power outage, and your printer is an old version, don't support a power loss recovery, or yours are newest version support power loss recovery and just forget to click OK ...

  • Mac OS: How to Manually Configure Cura's Parameters for Independent Dual Extruder 3D Printer Also Known as Tenlog DMP 3D Printer
    • December 26, 2019

    We use TL-D3 Pro for demonstration. Just need to change building volume to other model, such as Hands 2 (220mm*220mm*250mm), TL-D5(500mm*500mm*500mm), TL-D6(600mm*600mm*600mm) 1. The most important thing is to set the Start and End G-code for the Tenlog DMP printer. So we first show the G-code settings in the machine settings. You can download all the pictures and G-code from our Download Center S...

  • How to Upgrade Drivers to TMC2208 from A4988
    • December 19, 2019

    1. Please make sure that the drive module and motherboard are placed in the direction shown in the figure below. Please note the direction of the screws in the red circle⭕. 2. Change the wire sequence of the total 7 motors as shown in the figure below.

  • New Firmware Update for Tenlog Independent Dual Extruder 3D Printer 27th, Nov, 2019
    • November 27, 2019

    Bug Fix: When the Fialments Runout, the temperature of the hot bed will not drop. Downloaded here https://www.tenlog3d.com/download_d5 It is best to check if the MD5 value is the same as ours before upgrading. File Name MD5 SHA1 CRC32 Touch_D2P.hex 79AB07C5673C89D8D53C88477A2E31DE 8D780F35CB105D9E76DC84DD1D45843CBE4111F7 6357A3CB Touch_D2P_PLR.hex AB8361C8E97CE5D07C316717D5AE56EF 9C8FA195B750...

  • Tenlog Smart DMP 3D Printing Firmware and UI in LCD Upgraded on Nov. 23th, 2019
    • November 23, 2019

    We ended the last firmware update, fixed some bugs, and improved the UI. Downloaded here https://www.tenlog3d.com/download_d5 Note: 1. File type .hex is for motherboard, .tft is for Touch Screen. 2. Select your correct machine model and do not brush the wrong firmware. Brushing in other third-party firmware will void the warranty. 3. File name rules, file names with PLR are used for machines with ...

  • How to Upgarde Firmware and UI for Tenlog DMP 3D Printer
    • November 20, 2019

    1. Watch Videos Here https://www.tenlog3d.com/video_nc2 2. Download Here https://www.tenlog3d.com/download_d5 Note: 1. Select your correct machine model and do not brush the wrong firmware. Brushing in other third-party firmware will void the warranty. 2. File name rules, file names with PLR are used for machines with Power-loss Recover & Filament Runout Detection. If your printer does not hav...

  • Tenlog 3D are on Google Photos
    • November 17, 2019

    We post UHD photos of Independent Dual 3D Printer printed objects without any PS work in Google Photos. Find our Google Photos at the bottom of our homepage.

  • What's Different between Tenlog Hands 2B and Hands 2S DMP 3D Printer
    • November 15, 2019

    They are same model but different color, just select the color which you like! And Hands 2S stand for Hand2 2 Silver color, Hands 2B stand for Hands 2 Black

  • Assembly Instruction Guide for Independent Dual Extruder 3D Printer, How to Assemble TL-D3 Pro DMP 3D Printer
    • October 31, 2019

    Looking for assembly instructions for Tenlog TL-D3 Pro? Come to our download center to download it. We will upload the latest instruction manual and Cura software(with Settings for DMP 3D Printer)in the download center.

    • 1

      2
    a total of

    2

    pages

Copyright © 2015-2020 Shenzhen Tenlog 3D Technology Co., Ltd.All Rights Reserved.

top

leave a message

leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.