Tenlog TL-D6 Best Dual Extruder 3D Printer Large Format 600*mm*600mm*600mm

(End-of-life)Our TL-D3S Dual Nozzle 3D Printer is upgraded from a single-nozzle 3D Printer Kit with a building volume of 300mm*300mm*400mm, which is not reduced but doubles in printing efficiency. It is a pre-assembled 3D Printer Kits that can be easily assembled in less than 5 minutes. It supports Double-Color printing mode, the parameters of the double nozzles can be set separately, such as Temperature, Extruder Speed, Printing Speed, and Infill Density. Even you can use two nozzles of different diameters at the same time. Give you more free DIY space.

Our TL-D3 Pro Dual Extruder 3D Printer has Double Nozzles that are independent of each other, allowing it to be printed in Duplication and Mirror mode. You can also choose double different colors or materials to create at the same time. or print soluble support(such as PVA) to precisely implement models that are difficult to lay down. Thanks to the new DMP3d printing system, TL-D3 Pro gives you better creative space and double productivity!

The Tenlog TL-D5 Dual Filament 3D Printer brings a large building volume 500*mm*500mm*600mm, giving you more creative space. It has 2 Z-axis metal supporting rod to reduce a lot of sway and make the printing platform more stable during printing.

Hands 2 IDEX 3D Printer, the smallest Independent Dual Extruder 3D Printer from Tenlog 3D Never Lose Hand, Powerful for Your Creation! The Really Multi Color 3D Printer! Printing good Multi Color objects. All in One Connector, collect all interfaces of extruder, hot end, temperature sensor, two fans, and break sensor. Extruder & Nozzles Kits is designed for quick disassembly and installation, very easy to change.

(End of Life, only Black Color is available)Hands 2W White Color, Its buliding volume 220mm*220mm*250mm is smaller, but it's a Multi Extruder 3D Printer. It can combine a variety of different materials.

Hands 2 Pro IDEX 3D Printer, the smallest Independent Dual Extruder 3D Printer from Tenlog 3D Never Lose Hand, Powerful for Your Creation! The Really Multi Color 3D Printer! Printing good Multi Color objects. All in One Connector, collect all interfaces of extruder, hot end, temperature sensor, two fans, and break sensor. Extruder & Nozzles Kits is designed for quick disassembly and installation, very easy to change.

Work on 24V, Maximum temperature 260℃ Nozzle diameter 0.6mm

We have developed the DMP 3D printing system ourselves, and DMP stands for Dual Material Printing or Duplication & Mirror Printing. It can move 7-axis at the same time and has the firmware collision avoidance function of running two nozzles efficiently. Our self-developed TENLOG® Multi Nozzle 3D Printer Motherboard has a 7-axis motion control system. The Tenlog motherboard can work for 500 hours without interruption. The motherboard firmware is based on marlin 1.0.x and is open source. You can buy it to make a spare part for Tenlog Dual Extruder 3D Printer.