Tenlog's Fifth Anniversary, Thanks for Your Company, TL-D3 Pro OFF (This Promotion Has Ended)
We have received a lot of support from you against the COVID-19. Thank you very much for staying with Tenlog for so many years. We will continue our discount promotions until we run out of stock.
TL-D3 Pro USD $100 OFF for USA and Europe
This promotion will end until we run out of stock
For USA customers:
You can choose the printer assembly with A4988 or TMC2208 Driver to get $100 OFF.
Send from CA, USA warehouse in 1 day, 2-4 days to arrive! Free shipping and free customs!
For Europe customers:
Only these counties can get $100 OFF,
France, Germany, Belgium, Netherlands, Luxembourg, Austria, England,
Italy, Spain, Portugal, Denmark, Hungary, Poland, Czech Republic, Slovakia
You can only choose the printer assembly with TMC2208 Driver to get $100 OFF.
Send from France Warehouse in 1 day, 2-4 days to arrive! Free shipping and free customs!
Order Here, https://shop.tenlog3d.com/productinfo/436631.html
Tenlog IDEX 3D Printer can print 4 Goggles Bracket at same time.
Here are some tips of Cura for TL-D3 Pro Independent Dual Extruder 3D Printer,
1. Download the stl of Goggles Bracket from Tenlog's Google Drive
2. Multiply Selected Model to 3 Copies
Move them to the right place, like this,
Note: Don't let them touch each other
3.Write down the X coordinates of the first model on the left, ours is -86
4. Write down the X coordinates of the rightmost model, ours is 86
5. Calculate the distance between the first model and the fourth model as 86-(-86)=172, We need 3 spaces in total for 4 models, so each space is 172/3≈57.33mm(Write down this important value, used for step 9)
6. So the X coordinate value of the second model is -86+57.33≈-28.7
Enter -28.7 into the X coordinate of the second model
7. So the X coordinate value of the third model is -86+57.33+57.33≈28.7
Enter 28.7 into the X coordinate of the third model
8. Check the four models again to make sure they do not overlap
Then delete the two models on the right
9. Slice and Save Gcode, Open Gcode, put the code “M605 S2 X114.7” in the First line
The value of X represents the distance between Nozzle 1(E1) and Nozzle 2(E2)
The 114.7 is the distance between model NO. 1 and Model NO. 3(Come from step 5, 57.33*2≈114.7)
10. Save the modified gcode to the SD card, select the Duplication Printing mode on the printer screen, and start printing.
After printing, you will get 4 models.
Copyright © 2015-2023 Shenzhen Tenlog 3D Technology Co., Ltd.All Rights Reserved.