• October 26, 2019

Leveling of Independent Dual Extruder 3D Printer is different from common FDM 3D Printer. Tenlog Smart DMP 3D Printer give you a easy way to leveling two indepedent Extruder prefectly! Follow us on Youtube to get the newest videos！

• October 31, 2019

Looking for assembly instructions for Tenlog TL-D3 Pro? Come to our download center to download it. We will upload the latest instruction manual and Cura software(with Settings for DMP 3D Printer)in the download center.

• November 17, 2019

We post UHD photos of Independent Dual 3D Printer printed objects without any PS work in Google Photos. Find our Google Photos at the bottom of our homepage.

• November 20, 2019

1. Watch Videos Here https://www.tenlog3d.com/video_nc2 2. Download Here https://www.tenlog3d.com/download_d5 Note: 1. Select your correct machine model and do not brush the wrong firmware. Brushing in other third-party firmware will void the warranty. 2. File name rules, file names with PLR are used for machines with Power-loss Recover & Filament Runout Detection. If your printer does not hav...

• November 23, 2019

We ended the last firmware update, fixed some bugs, and improved the UI. Downloaded here https://www.tenlog3d.com/download_d5 Note: 1. File type .hex is for motherboard, .tft is for Touch Screen. 2. Select your correct machine model and do not brush the wrong firmware. Brushing in other third-party firmware will void the warranty. 3. File name rules, file names with PLR are used for machines with ...

• November 27, 2019

Bug Fix: When the Fialments Runout, the temperature of the hot bed will not drop. Downloaded here https://www.tenlog3d.com/download_d5 It is best to check if the MD5 value is the same as ours before upgrading. File Name MD5 SHA1 CRC32 Touch_D2P.hex 79AB07C5673C89D8D53C88477A2E31DE 8D780F35CB105D9E76DC84DD1D45843CBE4111F7 6357A3CB Touch_D2P_PLR.hex AB8361C8E97CE5D07C316717D5AE56EF 9C8FA195B750...

• December 26, 2019

We use TL-D3 Pro for demonstration. Just need to change building volume to other model, such as Hands 2 (220mm*220mm*250mm), TL-D5(500mm*500mm*600mm), TL-D6(600mm*600mm*600mm) 1. The most important thing is to set the Start and End G-code for the Tenlog DMP printer. So we first show the G-code settings in the machine settings. You can download all the pictures and G-code from our Download Center S...

• April 02, 2020

Cura for Tenlog DMP 3D Printer, All the settings are built into the software, just download and use, no tedious settings. Download from our Software Center(Only Windows Available) https://www.tenlog3d.com/download_d5

• April 03, 2020

Remember to level Nozzle Kit E1 Twice, to further reduce the deviation between the nozzle 1 and the hot bed!

• April 03, 2020

1. Although we set the nozzle offset before leaving the factory, the machine structure may change during transportation, so after receiving the tenlog DMP 3D Printer, you should make an offset adjustment. This allows the Independent Dual Extruder 3D Printer to print a perfect Dual-Material object. 2. When you reset the tenlog DMP 3D Printer to factory settings, or any other time you find that ther...

• July 09, 2020

We use TL-D3 Pro for demonstration. Just need to change building volume to other model, such as Hands 2 (220mm*220mm*250mm), TL-D5(500mm*500mm*500mm), TL-D6(600mm*600mm*600mm) 1. The most important thing is to set the Start and End G-code for the Tenlog DMP printer. So we first show the G-code settings in the machine settings. You can download all the pictures and G-code from our Download Center S...

• October 14, 2020

1. Replace A4988 Driver to TMC2208 on motherboard 2. Download IDEX Firmware from our Download Center 3. Burn the TMC2208 Firmware